[HEAD LIGHT, TAIL LIGHT]
Start the engine and make sure the lights
turn on. Also check to see if the lights are
damaged or if there is dirt on them.
[BRAKE LIGHT CHECK]
Turn the main switch to ON.
While separately operating the front and
rear brakes, check to see if the brake light
turns on. Also check to see if there is any
damage to the lens or if there is dirt on the
brake light.
[WINKER CHECK]
Turn the main switch to ON.
Check to see if all the winker in the front
and rear of the vehicle(including left and
right sides) are flashing properly, At the
same time, check to make sure that the
automatic sound signal of the winker is
working. Check also to see if any of the
lens are damaged or dirty.
Sit squarely on the seat and check to see if
you have a good view behind the vehicle
by looking at the rear view mirrors. Also
check for dirt and damage o n the rear
view mirrors.
Check to see if there is any dirt or damage
to the license plate.
Also check to see if the license plate is
firmly secured to the vehicle.
The frame and engine numbers are needed
w hen regis terin g mo torcycle or when
ordering parts.
●
Frame number is stamped on the right
side of steering head.
●
Engine number is stamped on left crank
case.
30
LIGHTS AND WINKER
FRAME AND ENGINE NUMBERS
BACK MIRROR
LICENSE PLATE
FR AME NUMB ER
ENGINE NUMBER
영문-메뉴얼작업 2005.12.29 5:12 PM 페이지30
Summary of Contents for VS125
