DAELIM HISTORY, Manual

Page: 48 / 64

●
Erect main stand and place vehicle in
upright position on level ground.
●
Check the spring for damage or loss of
tension and the side stand assembly for
freedom of movement.
●
Check the side stand ignition cut-off
system;
① Put the side stand up.
②
Start the engine.
③
Lower the side stand. The engine
should stop as you put the side stand
down.
●
If the side stand system does not operate
as described, inspect it in the closest
authorized repair center.
A rubber part is assembled on the cable to
protect the inner cable.
Make sure that this part is placed firmly
around the correct part of the cable. When
washing the car, do not directly spray
water on to the rubber part is dirty, use a
dry cloth to clean this area.
47
SIDE STAND INSPECTION
SIDE STAND
SPRING
CABLE RUBBER PART INSPECTION
INSPECTION
PART
RUBBER
INSPECTION
PART
CAUTION
●
Infiltration of the foreign materials
or water caused by damage of
lever(disengagement, tearing, etc.)
may cause freezing in winter
season resulting in faulty operation,
sudden accelation and braking
force decrease. If any damage is
found, replace with the new one
immediately.
**SL-125OWNERS(1~49) 02.11.5 4:22 PM 페이지47