DAELIM B-BONE, Owner'S Manual

Page: 43 / 68

41
●
To preserve the finish of metal parts and
paintwork, wash and clean your motorcycle
at regular intervals, anyway according to the
road conditions you ride in.
●
Especially during winter period through road
salt a continuous cleaning of the vehicle is
necessary so that remove the road salt. Use
specific products only.
●
Avoid aggressive detergents or solents
<IMPORTANT>
●
Do not wash your motorcycle right
after use.When the motorcycle is still
hot, water drops will evaporate faster
and spot hot surfaces.
●
Do not use high pressure water jets.
●
Never aim the nozzle direct at wheel
bearings, front fork seals, electric
items, air inlets or exhaust pipe ends.
●
Clean off stubborn dirt or exceeding
grease from engine parts using a
degreasing agent.
●
Be sure to avoid contact with drive
parts (chain, sprockets, etc)
Rinse with warm water and dry all
surfaces with chamois leather.
Extended storage, such as for winter,
requires that you take certain steps to
reduce the effects of deterioration from
non-use of the motorcycle.
In addition, necessary repairs should be
made BEFORE storing the motorcycle;
otherwise, these repairs may be forgotten
by the time the motorcycle is removed
from storage.
<STORAGE>
●
Empty the fuel tank into an approved
petrol container using a commercially
available hand siphon or an equivalent
method.
●
If storage will last more than one
month, carburetor draining is very
important, to assure proper
performance after storage.
STORAGE GUIDE GENERAL CLEANING