The Martin comes with an internal built-in Speed Controller. It can also
be used with our external Daedalus Speed Controller. Please note that
the external Daedalus Speed Controller cannot be stored within the
Martin Box.
Internal VS External
Speed Controller
To use the Internal Speed Controller, you’ll need to ensure that the
Internal/External Control Selection Switch
is set to
II
. Once this is
selected, you’ll be able to use the
Internal Direction Switch
to change
your flyer’s spin direction and the
Internal Speed Dial
to adjust your
flyer’s speed.
Internal Direction Switch
I
- Clockwise Z twist (commonly chosen for spinning singles)
0
- Neutral
II
- Counterclockwise S twist (commonly used for plying)
When using the Internal Speed Controller, you will need to plug your
power source into the outlet located externally on the Martin’s box,
on the right-hand side.
When needing to stop your wheel, scroll your
Internal Speed Dial
to
0
. If you are not going to resume spinning right away, you will want to
position the
Internal Direction Switch
to
Neutral (0)
.
Internal Speed Controller
12
