DAD DXZ Series, User Manual

Page: 12 / 16

12
DXZ26
EN
encoder; pushing the rotary encoder confirms the character selected and moves the cursor to the next
character to edit. Pushing the exit/ESC button erases the last confirmed character. Once the password is
set up, push the menu button again and the unit will be locked.
ATTENTION: Make sure to remember the password! When the unit is locked and you forgot the password,
it is not possible to unlock it without contacting your local service representative.
To unlock the unit select “Unlocked” and enter the password. The password is automatically checked after
each entered character, and the unit will exit the system menu when the password is confirmed. The de-
fault password is “Password”.
4.4 . Version Information
By pushing the rotary encoder, the display toggles through the version information about the unit (serial
number, firmware version), as well as some parameters like IP address, subnet mask, MAC address etc.