PLANNING
GUIDE
www.Dacor.com Phone: (800) 793-0093
Specifications subject to change without notice.
Install all appliances according to accompanying installation instructions.
8.12
RV30, RV36, RV46
fRoNt ExhAUst DImENsIoNs
cABP3 BLoWER - Bottom ExhAUst
ExhAUst LocAtIoNs AND DImENsIoNs
foR IN-LINE/REmotE BLoWER coNfIGURAtIoNs
(ILhsf oR REmP sERIEs BLoWERs)
fRoNt ExhAUst DImENsIoNs
cABP3 BLoWER - RIGht ExhAUst
fRoNt ExhAUst DImENsIoNs
cABP3 BLoWER - LEft ExhAUst
ExhAUst LocAtIoNs AND sIDE DImENsIoNs
foR cABP3 INtERNAL cABINEt BLoWER
Side Exhaust Locations (3 1/4” X 10”)
Vertical center line of bottom exhaust lines up with vertical
center line of chassis
Internal cabinet blower mounting location
Bottom Exhaust Location (3 1/4” X 10”)
CL
CL
CL
1 7/8" *
(48 mm)
1 7/8" * (48 mm)
Front View
Bottom View
14 3/8"
(365 mm)
*Back of unit lines
up with back of
cutout
RV
8 3/8" (213 mm)
from back of RV
cutout to center line
of CABP3 exhaust
in any orientation
(bottom, or side
exahust)
Bottom exhaust
configutation
with rear or bottom
duct routing
DUCT
DUCT
CL
CABP3
Cooktop
Duct connection
center line
B
Raised vent
center line
Countertop
3 1/4 X 10
Duct
connection
11 5/8"
(295 mm)
Duct connection
center line
C
Raised vent
center line
Countertop
3 1/4 X 10
Duct
connection
11 3/4"
(298 mm)
25 5/8"
(651 mm)
Duct connection
center line
A
Raised vent
center line
Countertop
3 1/4 X 10
Duct connection
Planning the Duct Work (continued)
Model
A
B
C
RV30
RV36
2” (51 mm)
6” (152 mm)
12” (205 mm)
RV46
5” (127 mm)
9” (229 mm)
9” (229 mm)
Document # PG08-003
Revised 03/29/10 Page 6/7
30”, 36”, 46” Wide,
Raised Vent
