Dacor Renaissance RNTT365GB, Use And Care Manual

Page: 7 / 24

5
Burner and Grate Assembly
WARNING
Assemble the burners and grates only when the
cooktop is cool to the touch.
Sear Burner
The sear burner gives an intense, hot 16,000 BTU
flame that is more than double the BTU of the
standard burners next to it.
1. Place the sear burner ring on top of the sear
burner base.
2. Gently twist the ring back and forth to make
sure it is properly seated.
3. Place the sear burner cap on the sear burner
ring. Align it into place.
4. Set the inner sear burner cap on the center of
the sear burner ring. Align it into place.
IMPORTANT : The burner rings seat only one way.
The burners will not operate properly unless all of
the burner pieces are properly aligned and seated.
If the burner or other parts do not fit or lay flat,
reverse the direction.
Setting Up Your Cooktop
Standard burner grate
Short grate finger
(toward front)
Standard
burner cap
Standard Burners
1. Gently set the standard burner rings on the
standard burner bases. Match sizes. Make sure
the cutout is aligned to allow the sensor clear-
ance. See diagram below.
2. Gently twist the rings back and forth to make
sure they are properly seated.
3. Place the standard burner caps on top of the
burner rings. Make sure they are aligned.
Grates
1. Gently set the sear burner grate on the left
side of the cooktop. Line up the indentations
on the bottom of the grate with the pins on top
of the cooktop. The grate only fits on one way,
so if it does not lay flat, try reversing it.
2. Gently set the standard burner grates on top
of the standard burners. The grate fingers on
the front of the grate are shorter than the fin-
gers on the back. Line up the indentations on
the bottom of the grate with the pins on top of
the cooktop.
Sear burner grate
Inner sear burner
cap
Sear burner
cap
Sear burner ring
Sensor
Standard Burner Assembly
Igniter
Sear burner
base
Standard burner ring
Standard burner
bases
Cutout
Sear Burner Assembly
Detail: Sear
burner base
Detail: Standard
burner base
Flame