6
Setting Up Your Cooktop
Grate Assembly
IMPORTANT: Assemble the grates as instructed below. When installed correctly, the openings in the
grates are centered over the burners.
1. Locate the notch on the bottom of each grate.
2. Use the notch on the bottom of each grate to determine where the grate is placed and orientated.
•
The notches underneath the grates fit in the
back
of the cooktop.
•
The notches on the left and right grates fit in the
sides
of the cooktop.
3. Gently lower the legs of the grates into their corresponding indentations on the cooktop.
NOTE: Burner and grate size varies with model.
Standard
burner
Left Grate
curved fingers
left to right
SimmerSear
™
burner
Notch underneath
the grate
Notch underneath
the grate
Center Grate
No curved fingers;
middle is open
Right Grate
curved fingers
right to left
Detail of Notch:
Side view of the grate with notch
Assembling the Grates
