All specifications subject to change without notice.
Phone: (800) 793-0093
www.dacor.com
PLANNING
GUIDE
ERV3015, ERV3615
Renaissance
30”, 36” Wide,
High Extension Slim Raised Vents
Document # PG08-004
Revised 10/28/11 Page 3/3
ExHAUSt oUtLEt LocAtIoN oPtIoNS
FRoNt VIEW
SIDE VIEW
All tolerances: ±1/16” (±1.6 mm) unless otherwise stated
nOTE:
See the appliance planning guide page for cutout dimensions
Rear Exhaust Knock Out (3 ¼” X 10”)
3”
Vertical center line of rear exhaust knock out lines up with vertical
center line of chassis
The vertical center line of bottom knock out is offset 3”
Side Exhaust Knock Outs (1
⅝
” X 16”)
Bottom Exhaust Knock Out (1
⅝
” X 16”)
Motor
cover
Front of unit
26" (66.0 cm)
6 1/2”
(16.5 cm)
1 1/8”
(2.9 cm)
CL
CL
CL
ADt2 tRANSItIoN (INcLUDED)
WIRING/coNDUIt coNNEctIoNS FoR
REmotE/IN-LINE bLoWER
3 ¼” X 10” to duct work
2” X 16”, connects to
side or bottom exhaust
on raised vent
1"
(2.5 cm)
5"
(12.7 cm)
Blower wiring access
hole in
bottom
Front of unit
Blower wiring
access hole in
side
