Dacor EG366SCH, Installation Instructions Manual

Page: 10 / 20

8
Installation Instructions
Unpack the Cooktop
WARNING
If the gas and electric service provided does not •
meet the product specifications, do not proceed with
the installation. Call the dealer, the gas supplier or a
licensed electrician.
The cooktop is heavy. A minimum of two people are
•
required to safely install it.
Unpack the parts box and verify that all required compo-
nents have been provided. If any item is missing or dam-
aged, please contact your dealer immediately. Do not install
a damaged or incomplete appliance. The customer must
report cosmetic issues within 30 days of installation.
Grates (3) •
*
Stack burner caps (2 large, 2 small) •
Stack burner rings (2 large, 2 small) •
Crown burner caps (2) •
Crown burner rings (2) •
Crown burner heads (2) •
Knobs (4 standard, 2 • MAX GRIDDLE )
Dacor Stainless Steel Cleaner •
Igniter cleaning brush •
WOK ring •
Griddle •
Hold down bolts/washers (2 sets) •
Regulator •
Literature kit •
*
Model EG486 comes with (3) 14 inch grates. Model
EG366 comes with (2) 10-inch grates and (1) 14-inch grate.
NOTE: The cooktop also includes a thread ring removal
tool (PN 101539). It is attached to the cooktop inside the
utility access hole on the bottom of the chassis. Return it
after use so that it is available if needed in the future.
Cooktop Installation
WARNING
To prevent damage to the gas pressure regulator, •
install it only after the cooktop is mounted in its per-
manent position.
Do not over-tighten the hold down bolts. Over tight-
•
ening the hold down bolts may result in improper
operation of the dual gas burners.
IMPORTANT
Do not use a hardening compound or caulk to
permanently seal the cooktop into place. The cooktop
must be readily removable if service is required. Removal
of sealant to service the unit will be performed at the
customer’s expense.
Lower the cooktop into the cutout while feeding the 1.
electrical cord into the utility cutout. Center the cooktop
in the cutout.
Secure the cooktop to the countertop using the two (2)
2.
provided hold-down bolts and washers provided. Do
not overtighten the bolts.