background image

7

m

ove

 u

niT

 

To

 f

inal

 P

osiTion

IMPORTANT:

 To avoid floor damage, make sure the levelers are 

raised (not touching floor) and the refrigerator is on the rollers 
before moving.

Place cardboard or plywood under refrigerator. Remove dolly.

1. 

Move the refrigerator straight back, evenly into the opening. 

2. 

Be sure that the refrigerator side trims are not interfering with 
the door opening. Also, be sure that the water tubing is not 
kinked and the power supply cord is on top of the refrigerator.

P

lug

 

in

 r

efrigeraTor

Plug the refrigerator into a 
grounded three prong outlet.

i

nsTallaTion

 i

nsTruCTions

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not 

completely installed. 
Keep doors taped closed until refrigerator is 

completely installed.
Use two or more people to move and install 

refrigerator.
Failure to do so can result in death or serious injury.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, 
fire, or electrical shock.

WARNING

l

eveling

Remove the base grille. Grasp the grille firmly an pull it 

1. 

toward you.

Using a 1/4” hex driver, turn the leveling screw on each side 

2. 

to raise or lower that side of the refrigerator.

NOTE:

 Having someone 

push against the top of the 
refrigerator takes some 
weight off the leveling 
screws. Doing so makes it 
easier to turn the screws.

To raise, turn the 

• 

leveling screw 
clockwise.

To lower, turn the 

• 

leveling screw counter-
clockwise.

Open the door again to make sure that it closes as easily as 

3. 

you like. If not, tilt the refrigerator slightly more to the rear 
by turning both adjustments screws clockwise. It may take 
several more turns, and you should turn both adjustment 
screws the same amount.

Replace the base grill.

4. 

H

anDle

 i

nsTallaTion

Some units do not come with the handle installed to allow 

• 

the customer to choose the handle style. Optional handle kits 
are also available. See the use and care manual for a list of 
available handle kits.

The installation instructions for the handle are included with 

• 

the kit.

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not 

completely installed. 
Keep doors taped closed until refrigerator is 

completely installed.
Use two or more people to move and install 

refrigerator.
Failure to do so can result in death or serious injury.

Summary of Contents for EF36BNNF Series












Reviews: