background image

English  25

Tr

ouble

shoo

ting

Problem

Cause

Action

Surface 
burners do 
not light.

The control knob is not set 
properly.

Push in the control knob and 
turn it to the Lite position.

The burner caps are not in 
place.
The burner base is misaligned.

Clean the electrodes.
Put the burner cap on the 
burner head.
Align the burner base.

A surface 
burner 
clicks during 
operation.

The control knob has been left 
in the Lite position.

After the burner lights, turn 
the control knob to a desired 
setting.
If the burner still clicks, contact 
a service technician.

The burners 
do not burn 
evenly.

Surface burner components 
and caps are not assembled 
correctly and level.

pages 

22

23

, and 

24

.

The surface burners are dirty.

Clean the surface burner 
components.
(pages 

20

21

, and 

22

.)

Very large 
or yellow 
surface 
burner 
flames.

The wrong burner orifice is 
installed.

Check the burner orifice size. 
Contact your installer if you 
have the wrong orifice (LP 
gas instead of natural gas or 
natural gas instead of LP gas).

Troubleshooting

If you encounter a problem with the cooktop, check the tables starting below, and 
then try the suggested actions.

Checkpoints

Gas safety

Problem

Possible cause

Action

You smell gas.

The surface burner knob 
is not in the 

OFF

 position 

and the burner is not lit.

Turn the burner knob to 

OFF

.

There is a gas leak.

Clear the room, building, or area 
of all occupants.
Immediately call your gas supplier 
from a neighbor’s phone. Do 
not call from your phone. It is 
electrical and could cause a spark 
that could ignite the gas. Follow 
the gas supplier’s instructions.
If you cannot reach your gas 
supplier, call the fire department.

Surface burner

Problem

Cause

Action

All burners 
do not light.

The power cord is not plugged 
into the electrical outlet.

Make sure the electrical plug 
is plugged into a live, properly 
grounded outlet.

A fuse in your home may be 
blown or the circuit breaker 
may have tripped.

Replace the fuse or reset the 
circuit breaker.

The gas supply is not properly 
connected or turned on.

See the Installation Instructions 
that came with your cooktop.

DTG36P875N_DG68-01285A-00_EN+MES+CFR.indb   25

2020-05-27   �� 10:57:11

Summary of Contents for DTG30P875N Series
































Reviews: