Burner grates and components
Turn off all surface burners and make sure they have all cooled down.
1
2
3
8
7
6
1.
Remove the burner grates.
2.
Remove the burner caps.
3.
Remove the burner heads from the
valve manifolds.
4.
Clean the grates and burner
part
s in
warm, soapy water.(Do not use steel-
wool or abrasive
cleaners.)
5.
Rinse and dry grates and burner
components thoroughly.
6.
Reassemble the burner heads
(
insert
ing
a starter electrode through
the hole in each head
)
.
NOTE
See pgs. 3
7.
Reassemble the
other
burner
par
ts,
ensuring
the caps lie flat
on
the heads.
8.
Re-install the grates in their
respective positions.
9.
Turn on each burner to verify proper
function
, then turn off the burner.
30
English