Dacor DRZ18 Series, User Manual

Page: 28 / 176

English 28
Operations
Operations
NOTE
• Alternatively, you can activate or deactivate OVERRIDE mode using the Dacor iQ
Kitchen app and the Energy Management function. See the next page.
Using the Energy Management Function
The Energy Management function enables you to control and monitor your Energy
Management refrigerator using the Dacor iQ Kitchen app for your convenience.
NOTE
• To use the Energy Management refrigerator functions, you have to install the
corresponding app first.
1. Operational Status, User Settings & Messages
- You can view the freezer temperature settings.
- You can receive an alarm when the freezer door is open for 2 minutes.
- You can check the DR and Override status.
- You can check the operational condition of the ice maker in the freezer.
2. Remote Management
- Power Freeze Setting: You can remotely activate the Power Freeze function.
- Ice On/Off Setting: You can remotely set up the Ice On/Off Setting function. You can
only control the Ice maker in the freezer remotely.
3. Energy Consumption Reporting
- Shows the accumulated power consumption. Power consumption data is updated
every 10 minutes.
NOTE
The energy consumption report may differ from the power consumption specifications of
the product depending on the operating environment and the stored food.
4. Delay Defrost Capability
- The Delay Defrost Capability function saves energy by delaying the defrost
operation to a time specified by the user. You can configure the time. and this
function will save energy during the specified period in a 24 hour cycle. If the
time is not set, the function works with the default time settings. The default time
settings are below:
- 6 am to 10 am: 1st. November ~ 30th. April
- 3 pm to 7 pm: 1st. May ~ 31th. October
To change the time setting for the Delay Defrost Capability
You can change the time setting for the Delay Defrost Capability on the app.
Dacor_BRR9000M_FRE_DA68-03607A-02_EN.indd 28 2017-03-20 5:35:34