Installation Instructions
English
52
19. Aligning the Panel
NOTE
Each custom panel comes with 12 dedicated screws for fine-tuning. Use a minimum
number of screws to fine-tune the custom panel with the cabinet. Once fine-tuning is
complete, fix the custom panel with the top nut.
There are two panel-adjustment mechanisms at the top and two at the bottom of the door.
Adjust the panel so it aligns with the surrounding cabinetry.
The gap between the cabinet and the panel must be:
•
1/8” (3 mm) on top
•
1/8” (3 mm) on the side for single installation
•
5/32” (4 mm) on the side for pair installation
1/8”
1/8”
1/8”
1/8”
5/32”
5/32”
5/32”
Summary of Contents for DRW24980RAP/LAP
Page 1: ...Installation Instructions Built In Wine Cellar DRW24980RAP LAP...
Page 69: ...Memo...
Page 70: ...Memo...
Page 71: ...Memo...