Dacor DOC30P977D Series, Installation Manual

Page: 2 / 60

2 English
C
ont
ent
s
Safety informations
Related equipment safety
Remove all tape and packaging before using the appliance. Dispose of the
packaging after unpacking the appliance. Never allow children to play with
packaging material.
Never modify or alter the construction of the appliance. For example, do not
remove panels, wire covers or screws.
Transport
To avoid damage to the oven vent, use the transport method shown in the picture
below.
A
B
A. Front
B. Pallet
Support the bottom of the oven from either
side when moving it into the installation
location. Leave the unit attached to the
shipping pallet until it is in front of the
cabinet opening and is ready to be lifted
into place.
DANGER
ELECTRICAL SHOCK HAZARD
To avoid risk of electrical shock, personal injury or death; verify your appliance
has been properly grounded in accordance with local codes or in absence of codes,
with the National Electrical Code (NEC). ANSI/NFPA 70-latest edition.
WARNING
MOVING HAZARD
To avoid risk of severe personal injury; this appliance requires two or more people
while handling and moving. Use of appliance moving devices is recommended.
Contents
Safety informations 2
Related equipment safety 2
Transport 2
Preparation 4
Checklist 4
Prepare to install the oven
4
Location requirements 5
Product dimensions - Combi. ovens 5
Cabinet dimensions 6
Installation instructions 9
Prepare built-in oven 9
Remove and replace oven door 9
Electrical connection 11
Install oven 13
Self-diagnosis 14
Temp sensor & Heater check 14
Troubleshooting 15
Information codes 15
Install_DOC30P977D_DG68-01317A-00_EN+MES+CFR.indb 2 2020-06-30 �� 4:51:33