All specifications subject to change without notice.
Phone: (800) 793-0093
www.dacor.com
PLANNING
GUIDE
EG366, EG486
Discovery
36” and 48” Wide
Slide-in Gas Cooktops
Document # PG04-001
Revised 09/27/12 Page 2/4
See note 2
2 See Cabinet/Countertop Dimensions - Top View
3 This specification not applicable for cabinets more
than a horizontal distance of 10” (25.4 cm) from the
edge of the cooktop.
1 Vertical to combustible surface from cooktop grate level;
if installing an overhead vent hood, also check the hood
specifications for minimum required clearances.
C
13” (33.0 cm)
max.
3
Top of
finished
counter
18” (45.7 cm)
min.
1, 3
30” (76.2 cm)
min.
1
Cutout for
utility access
Hood
Recommended
gas and electrical
service location,
consult local code
B
10” (25.4 cm) to
combustible side
wall Min. both sides
1/2” (1.3 cm)
overhang,
both sides
1 1/2” (3.8 cm)
typical countertop
thickness
7 3/4”
(19.7 cm)
36” (91.4 cm)
typical
Cooktop platform
1” (2.5 cm) Min.
thickness
Model No.
B
C
EG366
36” (91.4 cm)
36” (91.4 cm)*
42” (106.7 cm)**
EG486
48” (121.9 cm)
48” (121.9 cm)*
54” (137.2 cm)**
* Minimum ** Recommended
Cabinet tolerances: +1/16” (+1.6 mm), -0 unless otherwise noted.
CAbINEt/CoUNtErtoP DImENSIoNS - FroNt VIEW
CAbINEt/CoUNtErtoP DImENSIoNS -
ISo VIEW
continued on following pages...
