Dacor Discovery DYTT305NB, Installation Instructions Manual

Page: 10 / 18

8
Verify the Package Contents
Verify that all these items have been included:
• DYTT Induction Glass Cooktop
• Foam tape
• Hold-down brackets (2)
• Glass scraper (PN 82499)
• Dacor Cooktop Cleaning Creme (PN A300)
• Product literature
If any item is damaged/missing, contact your dealer imme-
diately. Do not install a damaged/incomplete cooktop.
Before starting the installation, make sure you have all the
equipment you need for proper installation.
Installing the Cooktop
WARNING
If the home’s electrical service does not meet the specifications
on Pg. 3, discontinue installation. Call a licensed electrician
to install the required wiring.
IMPORTANT
• Before installing the cooktop, verify that all minimum clear-
ances are met as specified on Pg. 3.
• Do not use a hardening compound, glue, or caulk to seal the
cooktop in place. The cooktop must be easily removable for
service. Removal of improper sealant to service the unit will
be charged to the customer.
1. Peel the backing from the foam tape provided, and
attach the tape to the bottom of the cooktop mounting
surface (as near the edge of the glass as possible).
2. Keeping the cooktop centered, lower it into the cutout.
3. With the two hold-down brackets provided, secure the
cooktop to the countertop.
4. Slide the brackets into the slots on the left and right
sides of the chassis, then snug (do not overtighten) the
screws to the underside of the countertop.
Connecting the Cooktop Wiring
WARNING
• To prevent electric shock, fire hazard, or appliance damage,
turn off power at the circuit-breaker panel or fuse box before
connecting the cooktop wiring.
• Connect the cooktop’s ground (green) wire to a grounded,
metallic, permanent wiring system or grounding conductor. Do
NOT ground the appliance to a neutral (white) house-supply
wire. You must use a separate ground wire.
• The cooktop must be properly grounded per these instruc-
tions whenever power is applied.
• For aluminum house-supply wiring, splice the cooktop copper
wires to the aluminum house wiring using special connectors
designed and agency-certified for joining copper and alumi-
num. Follow the connector manufacturer’s recommended pro-
cedure carefully to avoid creating a fire hazard.
IMPORTANT
Leave slack in the conduit so the cooktop can be removed for
service.
1. At the circuit breaker or fuse box, turn off power to the
circuit to which the cooktop will be connected.
2. Feed the appliance conduit into the junction box, and
attach it using a UL-certified strain relief.
3. Following local codes, use one of the methods on the
next page to connect the appliance to the junction box.
INSTALLATION INSTRUCTIONS