Dacor Discovery DYF30BFBPL Installation Instructions Download Page 3

Page: 3 / 4

Refrigerator Handle Kit Installation Instructions

Page 3

Stud installation - Custom Panel Models

Pro Style Handle Removal

Epicure Style Handle Removal

Set screw

holes

Set screw

holes

Set screw

holes

Set screw

hole

Set screw

hole

STEP 3 Custom panel models:

Install the four (4) han-

dle mounting studs in the locations of the pilot

holes drilled in step 2.

STEP 4 Custom panel models:

Install the custom pan-

els on the refrigerator according to the refrig-

erator installation instructions.

STEP 5 Models without custom panels:

Using a

3/32” hex wrench, loosen the set screws at

the ends of the existing handles. Remove the

handles. See diagrams below.

Summary of Contents for Discovery DYF30BFBPL

Page 1: ...following items are not provided with the kit and are required for proper installation 3 32 hex wrench Electric drill with 3 32 drill bit CAUTION To avoid damage to the refrigerator or handle compone...

Page 2: ...gerator door and 2 for the freezer drawer using a 3 32 drill bit The required spacing for proper fit are shown below Custom panels Handle Mounting Stud Locations Custom Panel Models with Hinges on Rig...

Page 3: ...rew hole STEP 3 Custom panel models Install the four 4 han dle mounting studs in the locations of the pilot holes drilled in step 2 STEP 4 Custom panel models Install the custom pan els on the refrige...

Page 4: ...130 www dacor com STEP 6 Place the new handles over the mounting studs Tighten the set screws at the ends of the handles into place using a 3 32 hex wrench Pro Style Handle Installation Epicure Style...