Installation
English
25
1 in.
(25 mm)
7⁄8 in.
(22 mm)
5⁄8 in.
(16 mm)
1.
Check the size of the sink’s drain hose
connector. If needed, cut the drain hose
so its end fits into the sink connector.
NOTE
If the drain hose does not fit into the sink
connector, you can purchase an adaptor at
a plumbing/hardware store.
2.
Insert the drain hose into the sink
connector, slide the hose clamp to the
end of the hose, and then tighten the
hose clamp.
3.
If the sink does not have an air gap,
detach the hose holder from the
dishwasher, and then cut off the
protruding part from the holder as
shown.
DACOR_DW9500M_DD68-00197A-01_EN.indd 25
2017-08-23 8:54:57
Summary of Contents for DDW24M999UM
