Dacor DDW24G9000AP, User Manual, Page: 54 / 88

05 Sanitize
With the
Sanitize
option selected, the water temperature is
increased to 167 °F (75 °C) in the final rinse cycle for high
temperature sanitization.
If you select the
Sanitize option, the "Sanitize" lamp blinks
when the water temperature reaches the sanitary temperature
(over 155 °F (68 °C)), and then remains illuminated until the
Sanitize
option ends.
When you open the door or press the
Power button, the "Sanitize"
lamp turns off.
NOTE
Only Normal cycle with the Sanitize option has been designed to
meet the requirements for soil removal and sanitization efficacy
in NSF 184. Certified residential dishwashers are not intended for
licensed food establishments.
For the Sanitize mode, the amount of detergent as
3 /
4
oz (20 g) in
Main wash dispenser and
1
/
3
oz (10 g) on the door for pre-wash is
used.
06 Smart Control
You can monitor and control the dishwasher remotely through
a Wi-Fi connection. To connect the dishwasher to your smart
phone for the first time, press and hold
Smart Control . For more
information, see the “ SmartThings ” section on page 62 .
07 Display
Displays information about the current cycle including the cycle
time, remaining time, Delay Start settings, and other cycle-specific
information.
If a problem occurs during operation, an information code will
appear with a warning sound. Refer to the information codes on
page
74 .
08 Delay Start
Delay a cycle for up to 24 hours in one-hour increments. To
increase the delay start time, press or hold the
Delay Start button.
The hour displayed indicates the time at which the wash will start.
- After setting the delay time, press the
Start button, and then
close the door to start the cycle.
- To change the delay time after the dishwasher has started,
first turn the dishwasher off and turn it back on. Then, select a
new cycle and change the delay time settings.
English 54
Oper
ations
Operations
DD68-00250L-00_IB_DACOR_DW8700B_EN.indd 54 2024-01-11 3:09:41