background image

IMPORTANT 

1.  Before beginning installation, please thoroughly read and become familiar with these instructions. 

2.  Installation and service must be completed by a qualified installer or service agency.

3.   Installer: Please leave these Installation Instructions with the owner.

4.   Owner: Please keep these instructions for local electrical inspectorʼs use and for future reference.

5.  Read the accompanying Use & Care Manual prior to operating this appliance.

TABLE OF STEPS

STEP    1    Verifying package contents                                                                                                               Page  2
STEP    2    Gas supply requirements                                                                                                                 Page  2
STEP    3    Electrical power supply requirements                                                                                              Page  2
STEP    4    Gas and electrical rough-in locations                                                                                              Page  2-3
STEP    5    Cabinet and countertop preparation                                                                                                Page  3-4
STEP    6    Overall dimensions                                                                                                                           Page  5
STEP    7    Installing the anti-tip bracket                                                                                                             Page  5
STEP    8    Gas regulator and electrical conduit location                                                                                 Page  6
STEP    9    Removal and installation of backguards                                                                                          Page  6
STEP    10  Removing the oven door                                                                                                                  Page  7
STEP    11  Electrical connection                                                                                                                        Page  7-8
STEP    12  Gas connection                                                                                                                                   Page  8
STEP    13  Installing the range                                                                                                                            Page  8
STEP    14  Installing the burner components                                                                                                     Page  9
STEP    15  Re-installing the oven door                                                                                                               Page  9
STEP    16  Verifying proper operation                                                                                                                 Page  9

Part No. 65089-D 

Rev. 123003

TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI Z21.1 STANDARD FOR 

HOUSEHOLD GAS COOKING APPLIANCES.

NOTES: 

   Contain helpful hints and tips to facilitate the installation.

CONVENTIONS USED IN THESE INSTRUCTIONS

IMPORTANT:

   Must be followed carefully to avoid damage.

WARNINGS:

   Must be followed carefully to avoid personal injury.

SAVE AND READ THESE INSTRUCTIONS

Installation Instructions

Epicure™ Ranges

Summary of Contents for 65089-D

















Reviews: