
6
4. Front panel
⑴
DN-10W, DN-20W, DN-25W, DN-27W, DN-30W, DN-50W
①
comparison output Indication LED: The LED lights up when the Relay is in contact
output state.
②
HOLD Indication LED: This LED will be lighted when the measured value is on Hold.
③
MOD
: Measured value stable (on), unstable (off) indication
④
Measured value Indication: It indicates the measured value and each setting value.
⑤
Measruing Mode : Once this Key is pressed for more than 1 second, the current
measuring value will be Zero (0) and the Analog output will be 0V (4mA) as well.
SET-UP Mode
: Once this is pressed on the Function Mode, you will return to the
measuring mode.
⑥
Measuring Mode : Once this Key is pressed, the lower limit setting value will be
displayed and this value also can be changed.
SET-UP Mode
: The location of row for the number flickering can be moved.
⑦
Measuring Mode : Once this Key is pressed, the upper limit setting value will be
displayed and the value can be changed.
SET-UP Mode
: The flickering number will be increased by 1 and 1.
⑧
Measuring Mode : Once this Key is pressed, HOLD will be selected and once this key
is pressed again, HOLD will be cancelled.
SET-UP Mode
: Save each set-up value.
※
Measuring Mode
: The state in which the current measurement is being displayed
※
SET-UP Mode: State of entering function menu with key operation
Summary of Contents for DN-10W
Page 12: ...11 6 Wiring Diagram DN 10W DN 50W DN 20W ...
Page 13: ...12 DN 25W DN 27W DN 30W ...
Page 14: ...13 DN 70 DN 80 Example External Input PLC Connection ...
Page 17: ...16 ...