7
SECTION 2: TECHNICAL SPECIFICATIONS
The
OMEGA-HB Brinell hardness tester
is a ball indenter designed to evaluate metallographic
specimen hardness.
The
OMEGA-HB Brinell hardness tester
uses a load-cell to apply loads ranging from 62.5 kg to
3000 kg.
Electrical Specifications:
110V/220V Single Phase
Test forces
62.5 kg (612.9 N)
100 kg (980 N)
125 kg (1226 N)
187.5 kg (1839 N)
250 kg (2452 N)
500 kg (4900 N)
750 kg (7335 N)
1000 kg (9800 N)
1500 kg (14700 N)
3000 kg (29400 N)
Hardness Range (HBW)
8~650 HBW
Dwell time of test force
5-60 seconds
Max. Height of Specimen
8.7-inches (220 mm)
Max. Width of Specimen
5.3-inch (135 mm)
Minimum Division on
micrometer drum wheel
0.005 mm
Weight
275 lbs (125 kg)
Dimensions (W x D x H)
9.25 x 21.5 x 29.7-inches
(235 x 545 x 755 mm)
Working temperature
70-85° F (23-28° C)
Storage Temperature:
32 – 100° F (0 – 40° C)
Power
110V (50/60 Hz)
