Water Bubbler:
In order to use the bubbler turn it upside down, then add water. Do not overfill. After adding water
reverse the bubbler back, and suck on the mouthpiece one time in order to prevent water from leaking.
Special Notices:
Please make sure water is not leaking out of the bubbler before attaching it to the vaporizer, nor should
you blow back into the bubbler. Both these actions may cause damage to your vaporizer.
LED indicator:
Red: Hold the power button for 3 seconds until it lights up red. This indicates that the Inspire is now
heating.
Blue: When fully heated the light will shine blue. You may now begin your vaping session. (If you don't
touch any of the Inspire buttons within 3-9 minutes when it is in vaping models, it will turn off
automatically. If you want to use other vaping models please turn on Inspire and use it again).
Charging
Charge your Inspire vaporizer for 3 hours. The OLED display will show the battery status, when it is it
fully charged take off the charging cable. You can also take the battery out of your Inspire and charge it
with your 18650 charger.
Tips
For best vaping experience, please do not overpack the heating chamber with your materials. This will
ensure easy air flow passage for even heating. In the case that vapor is not being released, use the
packing tool to gently stir the product within the chamber.
Clean Heating Chamber: use the brush tool to gently clean the walls of the heating chamber.
Clean the Filter: use a paper clip or a pin and insert within the holes. Push all the way through to ensure
clear airway, then wipe clean with a cloth.
Clean the Mouthpiece: Use a cotton swab and wipe the inner part of the mouthpiece then wipe with a
damp paper towel.
When you finish your vaping cycle turn off the device and place in a secure location.
Important Information
WARNINGS:
BATTERY!
Unit contains Lithium-ion batteries, please be sure to discard of them in a proper receptacle. Do not
overcharge it; Do not short circuit it.
