English
English
7
Presentation
Presentation
Presentation
Dear Client,
Welcome!
We are really proud of your preference for our
product. Your familiarization with
Ultraled
curing
light model will help maximize its performance and
increase its durability and benefits. Therefore, before
starting your equipment, be sure to read this Manual
very attentively.
Important
All the information, illustrations and specifications
contained in this manual are based on data existing at
the time of its publication. We reserve the right to make
any modifications deemed necessary both on the product
and in this Manual without previous notice.
Activation button
Handpiece
Base module
“Equipment-on” indicating LED
Extension cord
Power input cord
Master switch
Light Tips
(fig. B)
Semi-guided curing light tip
Acrylic curing light tip
Acrylic light tip for one-tooth bleaching
Acrylic light tip for three-tooth bleaching
Installation
Installation
Installation
Light Curing (Photopolymerization)
Attach the acrylic curing light tip to the front orifice
of the handpiece.
Plug the equipment in the power source outlet, and
turn on its master switch.
The equipment will emit three short tones to indicate
that it is on.
1
2
3
4
5
6
7
8
1
2
3
4
Contents
Contents
Contents
Legend ............................................................07
Ultraled ....................................................07
Light tips ..................................................07
Installation .....................................................07
Additional procedures prior to equipment
use/reutilization ............................................07
Operation .......................................................07
Cleaning .........................................................08
Sterilization ....................................................08
Maintenance ..................................................08
Recommendations .........................................09
Procedures in case equipment functioning is
altered ............................................................09
Sensitivity to predictable environmental
conditions in normal working situations .........09
Procedures in case of equipment disposal ...09
Transportation and storage conditions ........09
After installation ...........................................09
Preparation prior to delivery ........................09
Dabi Atlante Authorized Service Network ..10
Symbols ..........................................................10
Final recommendations .................................10
Equipment Warranty .....................................10
Technical features ..........................................10
Troubleshooting .............................................10
Legend
Legend
Legend
Ultraled
(fig. A)
Acrylic curing light tip
Additional procedures prior to
equipment use/reutilization
Additional procedures prior to
Additional procedures prior to
equipment use/reutilization
equipment use/reutilization
Prior to equipment use/reutilization, follow the
operation and cleaning instructions in this Manual.
Operation
Operation
Operation
Move the handpiece into the patient’s mouth and
position the light tip at a maximum distance of 2mm
from the material to be cured (photopolymerized).
The acrylic curing light is supplied with
Ultraled
. It is possible to use the semi-guided
tip, which is sold separately. After the tip has
been attached to the equipment, it should be
cleaned with some gauze, since oiliness from
the user’s hands and other stains on the acrylic
tip may affect light conduction.
Press the button to activate the LED, which will light
up slowly. As soon as it is activated, the LED will
remain on during the set time and a tone will be
heard every 10 seconds.
When the programmed time has ended, the LED will
go off. (refer to “Time setting”).
