background image

12

Recommendations for preserving the equipment

Your  Dabi  Atlante  equipment  has  been  designed  and  developed  according  to  the  standards  of 

modern techology. Similarly to other kinds of equipment, it requires special care, which is many times 

neglected due to several reasons and circunstances. Therefore, here are some important reminders

for your daily routine. Try to follow these simple rules, which will save you a lot of time and will 

avoid unnecessary expenses once they start making part of your working procedure.

Transportation, storage and operation

This equipment must be transported and stored observing the following directions:

- Avoid falls and impacts;

- Keep it dry, do not expose it to rain, water drops or wet floor;

- Keep it away from water and direct sunlight, and in it original wrapping;

- Don’t move it over irregular surfaces, protect it from rain and observe the maximum stack quantity

specified in the packaging;

Environmental condition for transportation or storage:

- Room temperature range for transportation or storage -29ºC to +60ºC.

- Relative humidity range for transportation or storage 20% to 90%.

- Atmospheric pressure range 500hPa to 1060 hPa (375 mmHg to 795 mmHg).

Environmental operation condition:

- Room temperature range for funct10ºC to +40ºC.

- Recommended room temperature range +21ºC to +26ºC.

- Relative humidity range for functioning 30% to 75%.

- Atmospheric pressure range 700 hPa to 1060 hPa (525 mmHg to 795 mmHg).

- Operation altitude: ≤2000m.

PRECAUTIONS, RESTRICTIONS AND WARNINGS

ATTENTION 

The Equipment maintains its condition of safety and efficacy, provided that it is maintained (stored) 

as mentioned in this instruction of use. Thus, the equipment will not lose or alter its physical and 

dimensional features. 

Sensibility to predictable environmental conditions in regular use conditions

The  equipment  has  been  planned  not  to  be  sensitive  to  interference  such  as  magnetic  fields, 

external electrical factors, electrostatic discharge, pressure or variance of pressure, provided that 

the  equipment  is  installed,  maintained,  clean,  preserved,  transported  and  operated  as  per  this 

instruction for use.

Precautions and warnings “during the use” of equipment

- The equipment should only be operated by duly enabled and trained technicians (Dental Surgeons,

Capacitated Professionals).

-  Before  the  first  use  and/or  after  long  interruptions  from  work  such  as  vacations,  clean  and 

disinfect the equipment.

- If any maintenance should be required, only use services of the Dabi Atlante Authorized  Technical 

Assistance.

- Owing to its delicate components, this handpiece must not be dropped or undergo impacts.

- Although this equipment has been planned in accordance with the standards of electromagnetic 

compatibility, it can, in very extreme conditions, cause interference with other equipment. Do not 

use this equipment together with other devices very sensitive to interference or with devices which 

Summary of Contents for MICRO MOTOR INTRA 32MM C SPRAY TB





















Reviews: