DAB Evosta2 11/139 SAN V, Instruction For Installation And Maintenance

Page: 5 / 31

ENGLISH
30
1. KEY
The frontispiece shows the version of this document in the form V n.x . This version indicates that the document
is valid for all software versions of the device n.y . For example: V3.0 is valid for all Sw: 3.y.
In this document the following symbols will be used to avoid situations of ranger:
Situation of general danger. Failure to respect the instructions that follow may cause harm
to persons and property.
Situation of electric shock hazard. Failure to respect the instructions that follow may cause
a situation of grave risk for personal safety.
2. GENERAL
Read this documentation carefully before installation.
Skilled personnel: Installation must be carried out by competent, skilled personnel in possession of the
technical qualifications required by the specific legislation in force. The term skilled personnel means persons
whose training, experience and instruction, as well as their knowledge of the respective standards and
requirements for accident prevention and working conditions, have been approved by the person in charge of
plant safety,authorizing them to perform all the necessary activities, during which they are able to recognize
and avoid all dangers. (Definition for technical personnel IEC 364).
The appliance may not be used by children under 8 years old or by persons with reduced physical, sensory or
mental capacities, or who lack experience or knowledge, unless they are under supervision or after they have
received instructions concerning the safe use of the appliance and the understanding of the dangers involved.
Children must not play with the appliance.
Ensure that the product has not suffered any damage during transport or storage.
Check that the outer casing is unbroken and in excellent conditions.
2.1 Safety
Use is allowed only if the electric system is in possession of safety precautions in accordance with the
regulations in force in the country where the product is installed.
2.2 Responsibility
The Manufacturer does not vouch for correct operation of the machine or answer for any damage that it
may cause if it has been tampered with, modified and/or run outside the recommended work range or in
contrast with other indications given in this manual.
2.3 Particular warnings
Always switch off the mains power supply before working on the electrical or
mechanical part of the system. Wait for the warning lights on the control panel to go
out before opening the appliance. The capacitor of the direct current intermediate
circuit remains charged with dangerously high voltage even after the mains power has
been turned off.
Only firmly cabled mains connections are admissible. The appliance must be earthed
(IEC 536 class 1, NEC and other applicable standards).