Da-Lite Tensioned Cosmopolitan Series, Instruction Manual, Page: 10 / 31

10
230V Wiring Diagram For Screens Without A Built-In Low Voltage Control - European Switch
NOTE: A single switch cannot be used to operate more than one screen. In multiple control installations this switch is replaced by the low
voltage control, operated from push button stations. Contact the factory for further information.
230V Wiring Diagram For Screens Without A Built-In Low Voltage Control - Rocker Switch
To Junction Box, Mounted In Screen Case,
In Which Internal Wiring Terminates In
Black, Brown and Blue Leads
This Switch Cannot Be Used With LVC.
Rear View
of Switch
Black (Up)
Brown (Down)
Blue (Common)
Green & Yellow
(Ground)
Black (Up) Br
o
wn (Do
wn)
Blue (Common)
NOTE: Must be wired to conform to local wiring code.
Blue AC Common
Brown AC Hot
230V AC 50Hz
Green & Yellow (Ground)
Jumper Wire
Green & Yellow
(Ground)
Motor
NOTE:
A single switch cannot be used to operate more than one screen. In multiple control installations this switch is replaced by the low
voltage control, operated from push button stations. Contact the factory for further information.
To Junction Box, Mounted In Screen Case,
In Which Internal Wiring Terminates In
Black, Brown and Blue Leads
This Switch Cannot Be Used With LVC.
Rear View of DPDT, With
Center Off, Switch in Box
Black (Up)
Brown (Down)
Blue (Common)
Green & Yellow
(Ground)
Black (Up) Br
o
wn (Do
wn)
Blue (Common)
NOTE: Must be wired to conform to local wiring code.
Blue AC Common
Brown AC Hot
230V AC 50Hz
Green & Yellow (Ground)
Blue
Jumper Wire
Green & Yellow
(Ground)
Motor
Brown
Yellow
Up
Off
Down