Wall Mounting
Cleaning
1. The screen is shipped with one 44" wall bracket. This bracket
must be mounted to a flat surface into at least two wall studs.
2. Secure bracket to wall studs at the desired height. Make sure the
bracket is level. Drill holes and attach mounting bracket to the
wall. You will need at least 1" clearance above the drilled holes to
hang the screen
3. This step requires two people. Hang the screen on the wall
bracket (Figure 2). There is a lip on the back of the frame that
wedges itself into the wall bracket once fully installed.
4. Attach bottom of screen to wall with two screws. The bottom
mounting holes are located under the tray (Figure 2).
The supplied cleaning cloth can be used to clean marks on the
screen surface made by everyday dry erase marker usage. To
clean persistent marks from dry erase markers, use the supplied
Da-Lite spray cleaner and cleaning cloth. To clean permanent
markers and other unintentional marks on the surface, use the
supplied Da-Lite spray cleaner and cleaning cloth or a melamine
foam cleaning pad.
Figure 2
Wall Bracket
Screws (Not Supplied)
#8 X 1 1⁄2” Screws
