Da-Lite G-200, Instructions Manual

Page: 3 / 8

ASSEMBLY INSTRUCTIONS (FIG. 1)
OPERATING INSTRUCTIONS
The G-200 overhead projector comes packaged in two
basic assemblies–the projection light box and the post -
head assembly. Instructions for assembly are as follows:
1. Remove 2 screws (A) from post.
2. Insert post into square hole in projector lid. Align
holes in post with holes on the side of the projector
lid.
3. Insert 2 screws (A) and tighten.
The G-200 overhead projector is now ready for
operation.
1. Set the projector, with the switch facing the screen,
on a projection table. Make sure the projector is
placed at a projection distance consistent with the
size of the screen, as indicated in the projection table
on page 2.
2. Connect the power cord to a suitable grounded
electrical outlet (refer to nameplate for electrical re-
quirements.)
3. Turn on the switch.
4. Place projection copy on projection stage.
5. Raise or lower image on screen by tilting top portion
of projection head. (Do not touch lens elements.)
1
6. Focus image on screen by turning the focusing knob,
which raises or lowers the projection head.
7. To turn off the projector, simply push the switch
down.
8. The G-200 is supplied with a safety thermal switch to
prevent fresnel or light box overheating. In the event
of motor malfunction or tampering, the G-200 lamp
will shut off automatically due to temperature rise.
(UL listed system.)
A
FIG. 1