2
Assembling Floor Model C and Stand
1. Insert two round tubes (1) through end bracket (2)
flush with outside of bracket. Tighten thumb screws
(3).
2. Slide center bracket (4) in place on round tubes (1).
Tighten thumb screws (3).
3. Place second end bracket (2) in position at opposite
end in same manner as center bracket (4).
4. Insert assembled tubes (5, 6 and 7) in socket of center
bracket (4) and lock spring button.
5. Place screen case in end brackets (2) with slat and
D-ring on top and aligned with center bracket (4).
6. Raise screen and hook D-ring into safety-catch of
hanger (8).
CAUTION! – Observe the following operating
instructions and mechanical sequence carefully
to avoid damaging your screen. DO NOT RAISE
tubing beyond the standard vertical height of
your particular Da-Lite screen.
4
1
2
3
11
10
6
9
7
8
5
