PRE-INSTALLATION
2
1. Carefully unpack screen.
2. Make sure to recheck measurements of screen location before installation.
3. Remove instruction cover plate (Fig. 1). Do not remove wrapping paper until screen is installed.
4. Remove the retainer screws from the slat bar before the case has been installed (Fig. 2).
INSTALLATION
FIGURE 1
CASE
INSTRUCTION COVER
FIGURE 2
SLAT RETAINER BRACKET
(3 SCREWS)
1 ON BOTTOM OF SLAT
2 ON INSIDE OF CASE
11
1
⁄
2
"
CASE LENGTH ÷ 2
11
1
⁄
2
"
11
1
⁄
2
"
11
1
⁄
2
"
(CASE LENGTH - 23") ÷ 3
(CASE LENGTH - 23") ÷ 3
(CASE LENGTH - 23") ÷ 3
CASE LENGTH ÷ 2
SCREENS 22' WIDE AND UNDER
SCREENS OVER 22' WIDE
FIGURE 3
Hangers (If required)
1. See Figure 3 for hanger placement.
2. Make sure hangers are placed to fit into notches of ironing board.
