HANDLING AND CARE OF
Polacoat In-Wall Rear Projection Screens
Page 1: ...HANDLING AND CARE OF Polacoat In Wall Rear Projection Screens ...
Page 2: ...coating 4 Handle and store screens such that they remain upright 5 For large screens with attached frames the strapping material should be left intact until the screen is located in its final position Do not remove Screen Orientation Polacoat In Wall rigid rear projection screens have a polished surface and a matte coated surface The polished surface should always be installed so that it faces the...
Page 3: ...lass area but never less than 4 100mm in length The setting blocks should be 1 16 1 6mm less than full channel width and high enough to provide the recommended nominal bite and minimum edge clearance for the glass This is to ensure that the glass will be supported under its entire width and will reduce the risk of misalignment of the setting blocks during installation either of which will cause po...
Page 4: ...r part to Da Lite transportation expenses to and from Da Lite are payable by the purchaser and Da Lite is not responsible for damage in shipment To protect yourself against damage or loss in transit insure the product and prepay all transportation expenses TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING WARRANTIES AS T...
