1
1. Unwrap the frame pieces. Assemble frame pieces on padding
material or other soft, clean surface. This will help keep the
frame clean and protect it from scratches.
2. Slide the frame pieces together at corners (Note: Frame
assembly holes may not appear to fit properly at the corners
until all fasteners have been attached. Once fasteners are
attached, the frame corners will be drawn in for a proper fit.)
Secure frame pieces with #10 screws provided. Do not
tighten screws until all are started, then tighten. See Figure 1.
NOTE: The frame pieces are labeled “top” and “bottom”. Be sure
the frame pieces are assembled according to the labels. This will
ensure the snap pattern on the frame and screen surface will
match.
3. Attach the eight snap studs to the back of the frame in the
predrilled holes.
FRAME ASSEMBLY
FIGURE 1 (REAR VIEW)
SCREWS
SNAPS
LARGE WALL BRACKET (47" LONG)
Quantities vary by screen size:
Screens 80" and smaller viewing width = 1
Screens over 80" to 96" viewing width = 2
QUANTITY INCLUDED __________
Screens over 96" viewing width = 3
Installation screws not included
SMALL WALL BRACKET (8" LONG)
Quantity = 1.
Only for screens
80" and smaller viewing width.
QUANTITY INCLUDED __________
Installation screws not included
SNAP STUD
QUANTITY INCLUDED ________
#10 SCREW
QUANTITY INCLUDED ________
HIGH POWER
®
FRAME BRACKET
Screens with High Power
®
quantity = 2
Screens with 2-piece side frame rails quantity = 2
QUANTITY INCLUDED ________________________________
USE INSTALLATION
METHOD NUMBER __________
