CEILING MOUNTING
1. Heavy screw hooks may be installed into
wood joists. Other types of hooks or chain
may be used for other ceilings or for stage
installations.
2. Insert hooks or chain through proper
openings provided in sides of end caps.
Screen must hang so that flat back of
case is perpendicular to floor.
3. MAKE SURE SCREEN IS MOUNTED
LEVEL.
PRECISION SEAMING
Large screens will have one or more horizontal
seams. Seams are standard and necessary in
large size screens since surfaces are limited to
the available fabric size.
Da-Lite Perma-Sealed seams are made by
butting carefully matched edges of two panels
together and fastening with special tape that is
sealed to the reverse side. These seams are
guaranteed not to separate. Seams in a picture
surface should not be construed as patched or
defective. In use, the seam will be virtually
invisible in the projected picture.
TO RE-ROLL YOUR PICTURE SURFACE
The Model C operates on the same principle
as a window shade. Pull down about 6 inches
to disengage the locking pawl and start the
fabric up firmly and quickly.
Large picture surfaces are heavy and will start
up too slowly to prevent the locking pawl from
catching unless help is provided, so keep
picture surface moving briskly.
Should the locking pawl catch, pull the picture
surface down about 6 inches and start the
surface up rapidly.
The CSR feature of this screen will allow the
screen to stop, as normal, in the bottom por-
tion of its travel. The screen will not stop in the
top portion of its travel, but will continue slow-
ly and gently into the case.
PROTECT YOUR SCREEN
Before re-rolling surface into case, examine
both front and back of surface to be sure they
are free of foreign matter.
WALL MOUNTED
PICTURE SURFACE
PICTURE SURFACE
CEILING HANGING
PICTURE SURFACE
USE No. 6 BRACKETS TO HANG
BEHIND BEAM OR VALANCE
PICTURE
SURFACE
CONCEALED
(ALLOW ROOM FOR ACCESS)
