manualshive.com logo in svg

D3 DesignCore RVP-TDA4V Series, Quick Start Manual

Share
Download
D3 DesignCore RVP-TDA4V Series Quick Start Manual Download Page 3

 

 

 

 

 

 

D3Engineering.com 

▪

 585.429.1550

 

 

DesignCore® RVP-TDA4Vx Development Kit

 

▪ Quick Start Guide

 

Document No. 00C-255 

▪

 Version 1.0 

▪

 Release Date: 9/9/20

 

CONFIDENTIAL 

▪

 3

 

 

1.0

 

Introduction 

 

The DesignCore™ RVP

-TDA4Vx Development Kit from D3 Engineering provides qualified developers with 

a fully functioning evaluation platform for on-vehicle testing and development of applications, for use 
primarily in the automotive, transportation, robotic, and material-handling industries.  

Built on the 

DesignCore® Rugged Vision Platform (RVP) Reference Design with Texas Instruments 

TDA4VM Automotive Vision Processor

, the RVP-TDA4Vx Development Kit comes ready to use out of the 

box and includes processor module, cables, software, and tools.   

The RVP-

TDA4Vx Development Kit’s base support package also provides optimized and verified 

hardware and software to use as a known-good launch point for design and development.   

In addition, this Development Kit includes a single-use sublicense for all Texas Instruments and D3 
Engineering firmware and application code.  

 

Summary of Contents for DesignCore RVP-TDA4V Series















Reviews:

No comments

Brands by name

Popular brands

Load more brands