© 2023
Step 5 of 5
Order #XXXXX
Locked layer contains
placeholder marks.
1
2
Counter Top Attachment
*
Align hole with pin.
Rotate pin. Spring
will push pin into hole.
Counter Top
Shelf
Shelf Supports
attach with
Velcro
Shelf Supports
attach with
Velcro
Back View
Front View
Top View
SEG Graphic Installation
Corner A
Corner D
Corner B
Corner C
It is important to first insert
graphic into each alternate
corner then to the sides of
the frame. If this is not done,
graphic will not fit into the
frame correctly.
Step 1
Insert corner A. Turn edge of
graphic so silicon welt is
perpendicular to face of
graphic. Insert narrow side
of welt with fabric to outside
into the channel. Repeat for
other side of this corner.
Step 2
Repeat Step 1 for opposite
corner C, then insert corner
B, followed by corner D, to
complete the installation of
the corners.
Step 3
Once all corners are inserted,
press one silicon edge into
channel from corners and
work toward the center.
Make sure welt is fully inserted
into channel. Continue until
all sides are done. Smooth
out edges of graphic.
Graphic Removal
To remove the graphic from
the frame, locate the fabric
pull tab. Gently pull up on
the tab to remove the fabric.
Steps:
1) Wrap
SEG Graphic
around front & sides of Counter, as shown.
2) Attach
Shelf Supports
using Velcro; place Internal
Shelf
.
3) Place
Counter Top
on top of assembly & secure in place.
SEG Gr
aphic
When assembled
GOD-1560 Counter Assembly (cont’d)
