2
Signal flow
•
Basic modules
2
Signal flow
This chapter describes the path of the signal’s flow through the Decimort plug-in, presents the basic components
of this effect unit and its control parameters.
Basic modules
The inside of Decimort consist of a few basic components, that correspond to the sections on the graphical interface:
Dual decimation unit
It is able to process two channels separately (left and right of stereo channel) in stereo mode, or only single channel
(left) in mono mode.
Decimator is controlled by two parameters:
•
Bits
– Number of bits the input signal is downgraded to. Values we can choose from
range 1 to 16 bits and additional value: Off, which means the input signal won’t be
downgraded in amplitude domain.
•
Frequency
– New sampling frequency to which the is degraded to in time domain.
There’s yet another control on a GUI, namely
AA LFP
– Anti Alias Low Pass Filter. Turn
this button on to set additional lowpass filter synchronized with
Frequency
, to protect
the signal against a “resampling images”.
Dual decimation unit
