7
⑨
BUTTON
[SER] : Searches the recorded data.
[CH] : Changes the camera on display.
(Camera 1
Camera 2 Camera 3 ->.... ->Camera 8 Camera 1)
[ESC] : Cancels or exists from the selected modes or menus.
[MENU] Enters into the menu.
[FN] : Being used in combination with other buttons as follows;
FN + UP: Uploads the configuration file (set operation condition, saved from
the DVR Viewer software through the USB memory stick.
FN + DOWN: Downloads the configuration file (set operation condition) of the
current BRX to USB memory stick.
[STA] : Displays current status of operation of BRX.
INFORMATION shows firmware version, GPS acceptance, Car Signal,
G-Sensor)
[Arrow/ Direction]: Moves the highlight between items in the setting menu.
Change the live display layout: Left arrow (8 channels), Right arrow
(4 channels)
INTRODUCTION
FRONT
[Time Delayed Function]
In case of Power On /Off by ACC signal in vehicle;
Time delayed start
Off
On : Starts BRX 5 seconds later and booting is completed in
47 seconds. Time delayed shutdown
On
Off : Stops recording immediately (record LED off) and
shutdown takes 75 seconds till completed (power LED off)
