7
⑨
BUTTON
[SER] : Searches the recorded data.
[CH] : Changes the camera on display.
(Camera 1 → Camera 2 → Camera 3 ->.... ->Camera 8 → Camera 1)
[ESC] : Cancels or exits from the selected modes or menus.
[MENU] Enters into the menu.
[FN] : Funtion Key: used in combination with other buttons as follows;
FN + UP: Uploads the configuration file (operation settings, saved from the
DVR Viewer software through the USB memory stick.
FN + DOWN: Downloads the configuration file (operation settings) of the
current BRX to USB memory stick.
[STA] : Displays current status of BRX DVR operation.
INFORMATION: shows firmware version, GPS acceptance, Car Signal, G-
Sensor)
[Arrow/ Direction]: Moves the highlight between items in the setting menu.
Change the live display layout: Left arrow(8 channels ), Right arrow( 4
channels)
INTRODUCTION
FRONT
[Time Delay Function]
In case of Power On /Off by ACC signal in vehicle;
Time delayed start
Off → On : Starts BRX 5 seconds later and booting is completed in 47 seconds.
Time delayed shutdown
On → Off : Stops recording immediately (record LED off) and shutdown takes
75 seconds till completed (power LED off)
