D-MAX DSC-230SI, User Manual

Page: 12 / 48

11
z
Did you connect the power cable in normal?
Figure 5.
INPORTANT NOTICE BEFORE INSTALLATION
z
Never extend the secondary cable of a power supply that is supplied in the pack. If it is extended the secondary cable, cause
serious damage to power unit of the dome.
z Never use UTP cable for power cable and please use solid or stranded wires.
z If do not use a supplied power supply in the pack, please refer to as following recommended wiring distance chart.
Product Capacity Chart
A partial list of compatible products and the number of units that may be powered by each power supply are listed below. Capacity is
based on the VA rating of each product to be used with the power supply.
Product The capacity of applied power supply
36 W 144 W 288 W
Superior Speed Dome (24 VAC)
1 Dome 4 Domes 8 Domes
The following are the recommended maximum distances (transformer to load) and are calculated with 10-percent voltage drop. (Ten
percent is generally the maximum allowable voltage drop for AC powered devices.) Distances are calculated in meter; values in
parentheses are feet.
Recommended Wiring Distance Chart
Wire Gauge
Input
Voltage
Input Current
Q’ty of
Camera
18 AWG (1.0
㎟
) 16 AWG (1.5
㎟
)
24 VAC 1.5 A 1 45 m (150 ft) 72 m (238 ft)
24 VAC 3 A 2 19 m (64 ft) 31 m (102 ft)
28 VAC 1.5 A 1 62 m (204 ft) 99 m (325 ft)
z
If yes, 1) the power is
on, RED LED glows
which is in the
middle of connector
.
z 2) The input power source
is AC 24V with a terminal
and with a jack.
z
Both of them can be used.