D-MAX DIC-5230DV, Manual

Page: 9 / 19

9
The screen color can be adjusted by using the WHITE BALANCE function.
Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
①
ATW1 : This automatically finds white color from color temperature between
2000~18,000°K.
②
ATW2 : This automatically finds white color from temperature between 4000~12,000°K.
③
AWC->SET : To find the optimal setting for the current luminance environment
in this mode, set the point the camera towards a sheet of white paper and press the
SET button. If the environment changes, read just it.
④ MANUAL : Select this to fine-tune White Balance manually.
Set White Balance first by using the ATW mode.
After that switch to MANUAL mode, fine-tune the White Balance and then press the SET
button.
▶ INDOOR: Fixed setting, adjusting white balance by 3,200°K.
▶
OUTDOOR: Fixed setting, adjusting white balance by 6,300°K.
BACKLIGHT
When there is a strong backlight behind the object, clear images of the background as well
as the object can still be obtained by using the BLC or HLC function.
①
OFF : Not being used
② BLC
You have to select desired area from a picture to run BLC function in advance and then
can see the area more clearly.
• AREA SEL – Can select areas up to 2 area
• ARA STATE – if STATE is ON, BLC function operates
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW
BACKLIGHT OFF
DAY& NIGHT COLOR
DPC
SPECIAL
RESET
EXIT
WBL MANUAL
COLOR TEMP
BLUE IIIIIIIIIIIIIIIIIIIII 126
RED IIIIIIIIIIIIIIIIIIIII 95
RETURN RET