２
AHD and TVI video output selection
Indoor
Outdoor
Set AHD or TVI video output using dip
switches on the camera body at bottom
cover.
Loosen the four bolts of the Bubble Cover,
Remove the camera housing, and set AHD or TVI
video output using dip switches on the camera
body at connect cover
You can set AHD or TVI video output of the right side DIP switch to the third position.
NOTE)
If only CVBS output ie when using only analog CVBS output without using the TVI / AHD
output must TVI / AHD mode should be used, and to TVI mode. AHD mode when the camera is
malfunctioning, and reboot. Be careful.
AHD
TVI
