17
16
When AGC is turned off, DNR does not operate.
8) SENS UP
SENS UP helps maintain a bright, clear screen image by automatically detecting
changes in the level of light in low light level conditions
Please position the arrow to point to 'SENS UP' on the
SETUP menu by using the UP and DOWN buttons.
Please select the mode you wish to operate by pressing
the LEFT or RIGHT button.
Please press the SETUP button when all the settings are
complete.
The maximum storage magnification in low light level
movement situations can be adjusted by pressing the
SETUP button in 'AUTO' mode.(X2~X128)
As the magnification increases, the screen gets brighter; however the after image
also increases
If storage magnification is increased while SENS UP is operating, it may cause
noise, and spots may appear; however this is normal.
- AUTO : Low light level auto mode
- OFF : The function does not operate
When SHUTTER is in the manual mode, SENS UP does not operate.
When AGC is turned off, SENS UP does not operate.
9) EXIT
Saves all the setting menus and then exits.
1) SPECIAL MENU
Please position the arrow to point to 'SPECIAL' on the
SETUP menu by using the UP and DOWN buttons.
Please select the mode you wish to operate by pressing
the UP or DOWN button
2) CAMERA ID
If the ID is input, the camera ID appears on the monitor.
Please position the arrow to point to 'CAMERA ID' by
using the UP or DOWN button.
Please select 'ON' by pressing the LEFT or RIGHT
button.
Please press the SETUP button.
Up to 15 letters can be used for the ID.
- Please move the cursor to the letter you wish to choose by using the UP and
DOWN button.
SETUP
LENS MNUAL
SHUTTER
ESC
WHITE BAL
ATM
BACKLIGHT
OFF
AGC
LOW
DNR
LOW
SENS-UP
OFF
SPECIAL
EXIT
6. Special Menu Operation
SETUP
LENS MANUAL
SHUTTER
ESC
WHITE BAL
ATM
BACKLIGHT
OFF
AGC
LOW
DNR
LOW
SENS-UP
OFF
SPECIAL
EXIT
SETUP
CAMERA ID
OFF
COLOR
ON
SYNC
INT
MOTION DET
OFF
PRIVACY
OFF
MIRROR
OFF
SHARPNESS
ON
RESET
RETURN
Camera ID
A B C D E F G H I J K L M
NOPQRSTUVWXYZ
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- .
0 1 2 3 4 5 6 7 8 9
CLR POS END
-------------------------
Note
Note