Reset procedure:
With the power off, press and hold the “Sound
mode
” button, the “TUNER PRESET CH +”
button, and the “POWER” button simultaneously
on the AVR for a few seconds until the display
starts flashing at interval of about 1 second.
Resetting the micro is a procedure used to "reboot" the microprocessor to restore its normal operation when it temporarily freezes, locks
up, or behaves erratically. Resetting the microprocessor, erases any saved settings you may have previously programmed into the unit.
Issues that can affect the performance of the microprocessor:
•
A jolt of static electricity
•
Current surge through an input
Before resetting the microprocessor;
•
Check all connections carefully
•
Check for setup errors
Reset
Power/Standby
button
SOUND MODE
button
TUNER PRESET CH + button
