D-Link xStack DES-3200 Series Reference Manual Download Page 128

Page: 128 / 647

xStack

DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide

124

10-16

enable ipif

Description

This commands is used to enable the IP interface.

Format

enable ipif [<ipif_name 12> | all]

Parameters

ipif_name

- Specify the name of the IP interface.

<ipif_name 12>

- Enter the IP interface name used here. This name can be up to 12

characters long.

all

– Specify that all the IP interfaces will be enabled.

Restrictions

Only Administrator, Operator and Power-User level users can issue this command.

Example

To enable an IP interface:

DES-3200-28P:admin#enable ipif newone

Command: enable ipif newone

Success.

DES-3200-28P:admin#

10-17

disable ipif

Description

This command is used to disable an IP interface.

Format

disable ipif [<ipif_name 12> | all]

Parameters

ipif_name

- Specify the name of the IP interface.

<ipif_name 12>

- Enter the IP interface name used here. This name can be up to 12

characters long.

all

– Specify that all the IP interfaces will be disabled.

Restrictions

Only Administrator, Operator and Power-User level users can issue this command.

Summary of Contents for xStack DES-3200 Series








































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for xStack DES-3200 Series

Reviews:

Related manuals for xStack DES-3200 Series

Brands by name

Popular brands

D-Link xStack DES-3200 Series, Reference Manual

Search results

Summary of Contents for xStack DES-3200 Series

Reviews:

Related manuals for xStack DES-3200 Series

Brands by name

Popular brands