7
Using the Configuration Utility (continued)
Link Info
SSID:
The Service Set Identifier is
the name assigned to the
wireless network. The fac-
tory SSID setting is de-
fault.
Tx Rate:
The default setting is Auto; Tx Rate settings are automatically determined for
an optimal speed up to a maximum of 54Mbps.
Status:
Displays the MAC address
of the access point or
router to which the WUA-
1340 is associated
Channel:
The default setting is Auto. The channel selection is automatically determined
by the WUA-1340.
Signal Strength:
Displays the signal strength of the WUA-1340’s wireless connection to the
access point or router.
Packet Count:
Displays the statistics of the data packets that are transmitted and received.
Frequency:
802.11b indicates that the
WUA-1340 is communi-
cating in the 2.4GHz band.
Encryption:
You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.
Wireless Mode:
Either Infrastructure or Ad-Hoc will be displayed here. (Please see the Getting
Started section in this manual for an explanation of these two modes.)
Rescan Button:
Rescans for the strongest signal with the current SSID and associates with
that access point or router.