manualshive.com logo in svg

D-Link WNA-2330 - Rangebooster G Cardbus 802.11G..., User Manual

Share
Download
D-Link WNA-2330 - Rangebooster G Cardbus 802.11G... User Manual Download Page 49

49

D-Link WNA-330 User Manual

Section 4 - Wireless Security

Configure 802.1x

Using the D-Link Utility

80.1x is for advanced users who are familiar with using a RADIUS server and setting up certificates.

1. Open the Wireless Utility by double-clicking on the D-Link icon in your system tray 

(lower-right corner of screen). Click on New to create a new profile or highlight an 
existing profile and click Modify. 

2. Select 802.1x under Set Security Option.

3. Click on Advanced Config to continue.

4. Next  to  EAP  Type,  select  EAP-TLS,  LEAP,  or  EAP-TTLS.  Extensible 

Authentication  Protocols  allow  devices  on  the  network  to  request 
authentication from the RADIUS server in the network. All the devices on 
the network must use the same EAP type when using a RADIUS server for 
authentication. Some RADIUS servers require that the Validate Server field 
be selected. Check this field if your RADIUS server requires validation.

5. Select an User Certificate from the drop-down menu.

6. Enter the login information required to authenticate.

7. Click Add to enter the IP address(es) of your RADIUS servers.

8. Click OK to save your settings.

Summary of Contents for WNA-2330 - Rangebooster G Cardbus 802.11G...







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands