2
D-Link DWL-7620AP Quick Install Guide
E
NG
LIS
H
About This Guide
This installation guide provides basic
instructions for installing the DWL-7620AP
Unified AC Tri Band PoE Access
on your
network. For additional information about
how to use the access point, please see the
User Manual, which is available on the CD
included in this package or from the D-Link
support website.
Unpacking the Product
System Requirements
Open the shipping carton and carefully
unpack its contents. Please consult the
packing list below to make sure all items
are present and undamaged. If any item is
missing or damaged, please contact your
local D-Link reseller for replacement.
-
DWL-7620AP
- Mounting ring
-
Console cable*
-
CD-ROM
-
Ceiling bracket (3 sets, sizes are 9/16",
14/16", and 1 1/2")
*The console cable is an optional
accessory and not included in the
package in Armenia, Azerbaijan, Belarus,
Georgia, Israel, Kaliningrad, Kazakhstan,
Kyrgyzstan, Latvia, Lithuania, Moldova,
Mongolia, Russia, Turkey, Turkmenistan,
Ukraine, and Uzbekistan. If a cable is
required, please contact your reseller to
order it (Model: ACS-AP-CONSOLE).
- CD-ROM drive
- Windows
®
, Macintosh
®
, or Linux-based
operating system
- An available Ethernet port
- Internet Explorer 11, Safari 7, Firefox 28,
Google Chrome 33 or higher
Optional Accessories
- PoE Injector (Model: DPE-301GI)
Note:
These accessories are not included
in the package. If any of these items are
required, please contact your reseller to
order it.
Hardware Overview
LEDs
Figure 1. DWL-7620AP LEDs
POWER
When this LED is red,
the access point is
booting up. When it is
green, it is ready for
use.
LAN1/LAN2
When this LED is lit, the
device’s Ethernet port is
connected to an active
router or switch. The
light will flash when data
is being transmitted
through the port.
2.4GHz/5GHz
When the LED is lit, the
access point’s wireless
radio is enabled. It will
flash when data is being
transmitted via wireless.
